Fire retardancy of emulsion polymerized poly (methyl methacrylate)/cerium(IV) dioxide and polystyrene/cerium(IV) dioxide nanocompositesGUIPENG CAI; HONGDIAN LU; YOU ZHOU et al.Thermochimica acta. 2012, Vol 549, pp 124-131, issn 0040-6031, 8 p.Article

Air plasma processing of poly(methyl methacrylate) micro-beads: Surface characterisationsCHAOZONG LIU; CUI, Nai-Yi; OSBECK, Susan et al.Applied surface science. 2012, Vol 259, pp 840-846, issn 0169-4332, 7 p.Article

Study on the thermal stability of polystyryl surfactants and their modified clay nanocompositesSHENGPEI SU; JIANG, David D; WILKIE, Charles A et al.Polymer degradation and stability. 2004, Vol 84, Num 2, pp 269-277, issn 0141-3910, 9 p.Article

Influence of Sb₂O₃ particles as filler on the thermal stability and flammability properties of poly(methyl methacrylate) (PMMA)LAACHACHI, A; COCHEZ, M; FERRIOL, M et al.Polymer degradation and stability. 2004, Vol 85, Num 1, pp 641-646, issn 0141-3910, 6 p.Article

Heats of adsorption of Pb on pristine and electron-irradiated poly(methyl methacrylate) by microcalorimetryDIAZ, S. F; ZHU, J. F; HARRIS, J. J. W et al.Surface science. 2005, Vol 598, Num 1-3, pp 22-34, issn 0039-6028, 13 p.Article

Removal of heavy metal ions from aqueous solutions by poly(methyl methacrylate-co-ethyl acrylate) and poly(methyl methacrylate-co-buthyl methacrylate) membranesCIFCI, Cemal; DURMAZ, Omur.Desalination and water treatment (Print). 2011, Vol 28, Num 1-3, pp 255-259, issn 1944-3994, 5 p.Article

Surface modification of hydroxyapatite with poly(methyl methacrylate) via surface-initiated ATRPYAN WANG; XI ZHANG; JINLIANG YAN et al.Applied surface science. 2011, Vol 257, Num 14, pp 6233-6238, issn 0169-4332, 6 p.Article

Surface studies on acrylic bone cementBETTENCOURT, A; CALADO, A; AMARAL, J et al.International journal of pharmaceutics. 2004, Vol 278, Num 1, pp 181-186, issn 0378-5173, 6 p.Article

Impacts of different polymer binders on electrochemical properties of LiFePO₄ cathodeVAN HIEP NGUYEN; WAN LIN WANG; EN MEI JIN et al.Applied surface science. 2013, Vol 282, pp 444-449, issn 0169-4332, 6 p.Article

Magnetorheological Characteristics of Carbonyl Iron Embedded Suspension Polymerized Poly(Methyl Methacrylate) Micro-BeadJAE LIM YOU; BONG JUN PARK; HYOUNG JIN CHOI et al.IEEE transactions on magnetics. 2008, Vol 44, Num 11, pp 3867-3870, issn 0018-9464, 4 p., 2Conference Paper

Biocompatibility and other properties of Acrylic bone cements prepared with antiseptic activatorsDE LA TORRE, B; FERNANDEZ, M; VAZQUEZ, B et al.Journal of biomedical materials research. 2003, Vol 66B, Num 2, pp 502-513, issn 0021-9304, 12 p.Article

Activation of poly(methyl methacrylate) surfaces by atmospheric pressure plasmaHOMOLA, Tomas; MATOUSEK, Jindřich; HERGELOVA, Beáta et al.Polymer degradation and stability. 2012, Vol 97, Num 6, pp 886-892, issn 0141-3910, 7 p.Article

The role of adsorption of sodium bis(2-ethylhexyl) sulfosuccinate in wetting of glass and poly(methyl methacrylate) surfaceHARKOT, Joanna; JANCZUK, Bronislaw.Applied surface science. 2008, Vol 254, Num 9, pp 2825-2830, issn 0169-4332, 6 p.Article

Development of PMMA/silica hybrid and its material propertiesFU, Yaqin; NI, Qing-Qing; KURASHIKI, Ken et al.Zairyo. 2003, Vol 52, Num 8, pp 992-997, issn 0514-5163, 6 p.Article

Chemical resistance of DLC thin film deposited PMMA substratesBAN, Masahito; YUHARA, Taku.Surface & coatings technology. 2009, Vol 203, Num 17-18, pp 2587-2590, issn 0257-8972, 4 p.Conference Paper

Submicron gold structures formed by atomic force microscopy lithography on thin films of poly(methyl methacrylate)KONGSHAUG, Kjell Ove; STEEN, Helge.Surface science. 2008, Vol 602, Num 18, pp 3051-3056, issn 0039-6028, 6 p.Article

Dielectric barrier discharge (DBD) processing of PMMA surface : Optimization of operational parametersCHAOZONG LIU; BROWN, Norman M. D; MEENAN, Brian J et al.Surface & coatings technology. 2006, Vol 201, Num 6, pp 2341-2350, issn 0257-8972, 10 p.Article

Development and molecular-weight issues on the lithographic performance of poly (methyl methacrylate)OLZIERSKI, A; RAPTIS, I.Microelectronic engineering. 2004, Vol 73-74, pp 244-251, issn 0167-9317, 8 p.Conference Paper

An investigation into the degree and rate of polymerization of poly(methyl methacrylate) in the ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphateBENTON, Michael G; BRAZEL, Christopher S.Polymer international. 2004, Vol 53, Num 8, pp 1113-1117, issn 0959-8103, 5 p.Article

Investigating the effect of pristine and modified silica nanoparticles on the kinetics of methyl methacrylate polymerizationMEHDI SALAMI-KALAJAHI; HADDADI-ASL, Vahid; RAHIMI-RAZIN, Saeid et al.Chemical engineering journal (1996). 2011, Vol 174, Num 1, pp 368-375, issn 1385-8947, 8 p.Article

Temperature dependence of rheological properties of poly(methyl methacrylate) filled with silica nanoparticlesTRIEBEL, C; MÜNSTEDT, H.Polymer (Guildford). 2011, Vol 52, Num 7, pp 1596-1602, issn 0032-3861, 7 p.Article

An experimental study of the scratch properties of poly( methyl methacrylate) as a function of the concentration of added slip agentKIM, Bong-Chul; KIM, Hyoung-Jun; CHOI, Byoung-Ho et al.Tribology international. 2011, Vol 44, Num 12, pp 2035-2041, issn 0301-679X, 7 p.Article

Poly(ethylene-co-vinyl alcohol) and poly(methyl methacrylate) blends : Phase behavior and morphologyARISTEIA DE LIMA, Juliana; FELISBERTI, Maria Isabel.European polymer journal. 2008, Vol 44, Num 4, pp 1140-1148, issn 0014-3057, 9 p.Article

Chemical mechanical polishing of polycarbonate and poly methyl methacrylate substratesZHONG, Z. W; WANG, Z. F; ZIRAJUTHEEN, B. M. P et al.Microelectronic engineering. 2005, Vol 81, Num 1, pp 117-124, issn 0167-9317, 8 p.Article

Vacuum-assisted thermal bonding of plastic capillary electrophoresis microchip imprinted with stainless steel templateZHIFENG CHEN; YUNHUA GAO; JINMING LIN et al.Journal of chromatography. 2004, Vol 1038, Num 1-2, pp 239-245, issn 0021-9673, 7 p.Article